Wiko Kenny Firmware Flash File


Wiko Kenny Firmware Flash File/Stock ROM Wiko Kenny

Initial Steps to Install Firmware on Wiko Kenny

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Wiko Kenny

  1. Download install SP flash tool, USB drivers, and firmware for your Wiko Kenny
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

See detailed Instruction MT flashing sp tool with images

Follow Video Tutorial

Might Also Like

Telenor T200M MT6572 Firmware Flash File

Haier 6190W Android 5.1 Stock ROM Flash File


File Name: Wiko_Kenny_MT6737M_EU_01082017.zip
File Size: 2 GB
Download Link

Leave a Reply