Wiko Freddy Stock Firmware Flash File


Wiko Freddy Stock Firmware Flash File/Stock ROM Wiko Freddy

Prerequisites for Installing ROM on Wiko Freddy

How To Flash ROM Wiko Freddy

  1. Download USB driver and flash file for your Wiko Freddy
  2. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  3. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  4. There should be the device called in device management:
  5. Qualcomm HS-USB QDLoader 9008 (COMXX)
  6. In any other case, you have to install drivers manually.
  7. Run QFIL.
  8. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  9. Load XML in Download Section:
  10. First select RawProgram File: rawprogram0.xml
  11. then Select Patch File: patch0.xml
  12. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  13. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  14. Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

See detailed Instruction Qualcomm flashing  QPST tool with images

Follow Video Tutorial

Might Also Like

Wiko View Prime Firmware Flash File

Samsung SM-N920G Stock Firmware Flash File

Download Wiko Freddy Stock Firmware (flash file)



File Name: Wiko_Freddy_V11_13122016_QFIL.zip
File Size: 1 GB
Download

Leave a Reply