Rivo Rhythm RX600 Android 5.1 Firmware Flash File


Rivo Rhythm RX600 Android 5.1 Firmware Flash File/Stock ROM Rivo Rhythm RX600

Initial Steps to Install Firmware on Rivo Rhythm RX600

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Rivo Rhythm RX600

  1. Download install SP flash tool, USB drivers, and firmware for your Rivo Rhythm RX600
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable into charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone to a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.

See detailed Instruction MT flashing sp tool with images

Might Also Like

Rivo Rhythm RX65 MT6582 Stock Firmware Flash File

RIVO RHYTHM RX450 MT6580 Android 5.1 Firmware Flash File



File Name: Rivo_Rhythm_RX600_MT6580_20160614_5.1.zip
File Size: 503 MB
How to Flash: Follow Tutorial
Download Link

Leave a Reply