Magnus bravo z25+

Magnus bravo z25+ MT6580 Firmware Flash File

Initial Steps to Install Firmware on Magnus bravo z25+  

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Magnus bravo z25+

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.


Might Also Like:

Karbonn Titanium K9 Smart Android 4.4 Firmware Flash File

Karbonn Titanium S21 Android 4.4.2 Firmware Flash File

Leave a Reply

Your email address will not be published. Required fields are marked *