Huawei Ascend G630-U10

Huawei Ascend G630-U20 Firmware Flash File


Huawei Ascend G630-U20 Firmware Flash File/Stock ROM Huawei Ascend G630-U20

How To ROM install Huawei Ascend G630-U20

  • Download Firmware For your Huawei Ascend G630-U20
  • Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 1G.
  •  Formatting SD card (optional).
  • copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
  • Check the root directory of the SD card you dload UPDATA.APP.
  • Step 5: SD card into the phone is switched on in the main screen, press the Menu key, the system updates -> SD card upgrade -> confirm -> upgrade, backup data, select the backup data; upgrade.
  • Step Six: The update process progress bar shows, after the finish of the pending progress bar, the phone automatically restart.
  • or
  • Step one: Prepare an SD card, it is recommended to use Sandisk, Kingstone, or Kingmax, size is recommended that more than 4G.
  • Formatting SD card (optional).
  • The step three: copy a large package path UPDATA.APP to the SD card dload UPDATA.APP.
  • Step four: Check the root directory of the SD card you dload UPDATA.APP.
  • Step Four: cell phone turned off, insert the SD card while pressing the volume up button + volume down key switch button, the phone automatically enters the upgrade mode, and then begin the upgrade in Figure
  • Step Five: After the progress bar to go full fixed, the phone will automatically restart If you do not manually remove the battery.
  • After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait
  • Like this post? Hit the share buttons below to share this article with your friends on Facebook, Google+ and Twitter.

Might Also Like



File Name: Huawei_Ascend_G630-U20_V100R001C00B119_4.3_EMUI_2.0_Lite_05012BDV.zip
File Size: 686 MB
How to Flash: Follow Tutorial
Download Link

Leave a Reply