Coolpad Mega 2.5D MT6735P Android 6.0 Firmware Flash File/Stock ROM Coolpad Mega 2.5D
Initial Steps to Install Firmware on Coolpad Mega 2.5D
- Download and install MTK Android USB drivers
- Download And Install SP Flash Tool
How To Flash Coolpad Mega 2.5D
- First, you need to download and install sp flash tool and usb driver for your Coolpad Mega 2.5D
- Download and install MTK Android USB drivers
- Then download Firmware file/Flash file/Rom for your phone
- Your phone must have 50 % charging before this process
- switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SPflash tool.exe
- When sp flash tool open, go to download button in sp flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in sp flash tool
- Close sp flash tool on your computer and unplug phone
- Power on the phone and enjoy
- After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait.
See detailed Instruction MT flashing sp tool with imges
Might Also Like:
Phicomm FWS710 Android 4.0.4 Firmware Flash File
Blu Dash G D490L MT6580 Firmware Flash File
Leave a Reply